Free Pressure Washing Pricing Calculator
Estimate what to charge by surface type and square footage. Industry-typical rate defaults — adjust to your market before using any of these numbers on an actual client.
Gut-feel pricing works until it doesn't — usually on a two-story house with a roof wash and a 600 sq ft driveway where you forgot to run the math before quoting a round number. This calculator gives you a starting range based on typical US industry rates. Enter your surface type and area, override the defaults if your market runs higher or lower, and get a ballpark estimate in about 10 seconds.
These are estimates only. Adjust for your costs, market, and job complexity before quoting a client.
Default rates used in this calculator
Industry-typical ranges from US market data — these are the starting defaults. Override them for your market.
| Surface | Unit | Low | High | Notes |
|---|---|---|---|---|
| House Wash | sq ft | $0.10 | $0.25 | Add for second story, heavy algae |
| Driveway / Concrete | sq ft | $0.08 | $0.18 | Most operators apply a $75–$150 minimum |
| Deck | sq ft | $0.35 | $0.65 | Higher for weathered wood, stain prep |
| Roof / Soft Wash | sq ft | $0.20 | $0.50 | Chemical mix cost factors in significantly |
| Sidewalk / Walkway | sq ft | $0.07 | $0.15 | Often bundled add-on with house wash |
| Fencing | linear ft | $1.50 | $4.00 | Wood vs vinyl, height, and condition vary widely |
How to use these estimates
- Start with the calculator range. Enter the actual measured area — not a gut-feel round number. If you don't have the measurement yet, use our guide to satellite measurement tools that pull square footage from an address without a site visit.
- Override the defaults. If your market or cost structure runs different from the typical range, change both the low and high rate. The calculator uses exactly what you enter — the defaults are a starting point, not a recommendation.
- Add a minimum. The calculator doesn't apply a minimum job price. Most operators set a $75–$150 minimum regardless of square footage to cover drive time and setup on small jobs. Build that check yourself before quoting.
- Factor in what the calculator doesn't. Chemical cost, multiple stories, heavy contamination, drive time, equipment wear, and state/local tax are not in the math. Add them before finalizing any quote.
Turn this range into a real quote
A calculator gives you a number. Your client needs a proposal — named, itemized, with online approval. Here's what to use next:
- Best overall quoting + job management: Jobber — pre-loaded house wash, driveway, deck, and fencing templates, send quote from your phone, online approval link. Core plan at $39/month. Is Jobber worth it? →
- Best for satellite measurement + AI quoting: QuoteIQ — measure a property remotely from an address, generate AI-drafted quotes from your service library, send approval links. Essentials at $29.99/month. Full QuoteIQ review →
- Compare quoting tools side by side: Best estimating and quoting software for pressure washing →
Frequently asked questions
How much should I charge for pressure washing a house?
A typical house wash runs $0.10–$0.25 per square foot, putting a 2,000 sq ft home in the $200–$500 range at industry-typical rates. Add more for second-story work, heavy algae, or long drive time. These are market-typical starting points — run the calculator with your own rate and your client's actual square footage before quoting.
How much should I charge for pressure washing a driveway?
Driveways typically run $0.08–$0.18 per square foot. A 500 sq ft driveway works out to $40–$90 — which is why most operators apply a minimum job price of $75–$150 regardless of size. Per-sq-ft math makes sense for large flatwork; flat minimums protect you on small ones that would otherwise barely cover your drive time.
What is a good minimum price for a pressure washing job?
Most US operators set a $75–$150 minimum regardless of square footage. Calculate your real minimum by modeling a 30-minute job: travel time + setup + break-down + chemicals + equipment cost. That number is your floor — anything below it costs you money to run. The calculator here won't enforce a minimum; add it manually before quoting.
Should I charge by the square foot or by the job for pressure washing?
Both work. Per-square-foot pricing builds a defensible, consistent proposal — useful when a client questions why your quote differs from a competitor's. Flat-rate pricing is faster to quote and easier to explain on the phone. Many operators calculate internally by sq ft and present a flat total. Either way, this calculator handles the math — how you present it to the client is up to you.
---Related resources:
- Best pressure washing software — full category overview →
- Best estimating and quoting software for pressure washing →
- Best pressure washing software for solo operators →
- Best invoicing software for pressure washing →
Rate defaults reflect typical US market ranges as of mid-2026. Verify against your own cost structure and local market before using in client-facing quotes. CrewKit is reader-supported — affiliate links above marked rel="sponsored".